S30 Pro Max Automatic Air-assist Laser Engraver Machine 20W

Laser Information:

Diode laser output power: 20W (note that this is light energy not electrical energy)

Laser focus: 0.08×0.1mm

Laser wavelength 455±5nm

Focusing method: fixed focus column + sliding device

Laser protection cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles.

Machine Information:

Engraving accuracy: 0.005mm

Engraving area size: the standard version is 370mm*363mm, which can be expanded to 935x400mm or 935x905mm

Machine power: about 120W

Air pump:

Type: mainboard-controlled air pump, voltage 12V, flow 30L/min

Air hose inner diameter: 7.5mm

Motherboard: 32-bit air-assisted motherboard, reserve Bluetooth, SD card offline printing function. (Upgrade Kit sold separately)

Engraving/cutting materials:

Engraving material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone

Cutting material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards

Operating software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Ben