S30 Pro Automatic Air-Assist Laser Engraving Machine 10W

Laser Information:

Diode laser output power: 10W (note that this is light energy not electrical energy)

Laser focus: 0.06×0.08mm

Laser wavelength 455±5nm

Focusing method: fixed focus column + sliding device

Laser protection cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles.

Machine Information:

Engraving accuracy: 0.005mm

Engraving area size: the standard version is 380x385mm, which can be expanded to 935x400mm or 935x905mm

Machine power: about 84W

Air pump:

Type: mainboard-controlled air pump, voltage 12V, flow 30L/min

Air hose inner diameter: 7.5mm

Motherboard: 32-bit air-assisted motherboard, reserve Bluetooth, SD card offline printing function. (Upgrade Kit sold separately)

Engraving/cutting materials:

Engraving material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone

Cutting material: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards

Operating software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.

Data transmission method: USB connection or Bluetooth wireless connection

Power supply: 

Power Input: 100-240V AC, 50/60HZ Output: 12V 7A

Packing weight: 6.85kg

Packing size: 62.3*24*22.5cm

Certification: CE FCC RoHS FDA ICE certification