235X235MM (9.25×9.25 Inches)
2x Build Surface & 1x Magnetic Base
Fit for SUNLU Terminator 3
And other equal or over 235×235mm hotbed platform
like Ender 3/Ender 3 pro/Ender 3 V2/Ender 5
Easy to use
After finding the correct magnetic direction(B part), you can stick the part on the build plate. Make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed. Make sure the direction before installation.
Easy model removal
For the model removal. Simply print on the surface, remove the upper magnetic surface from the lower, and flex slightly to pop the print right off.
Magnetic & Paste-able
2 parts of the build plate: A (upper)+B(lower)
Upper: It comes with magnetic surface, it plays an attractive role on the interaction with the front of lower.
Lower: magnetic adhesive base, it plays a fixed role. Place lower adhesive surface on top of normal build plate.
How to use?
1. Tear off the side(B part) with the adhesive
2. Stick the adhesive side of B part on the printing surface
3. Combine the magnetic side of A with B, and then you can start
4. After printing, pick up side A and the model together
5. Remove the model by genteelly bending the flexible magnetic plate
The product is divided into two parts(3pcs): A(upper)*2pcs + B(lower)*1pcs
-Part A: The top is a build surface, and the back is magnetic (the interaction with the front of Part B plays an attractive role)
-Part B: The top is magnetic (with the adsorption under the A part), the back is the adhesive (posted on the printer platform, which plays a fixed role)
-If it fails to adsorb, please rotate it 90 degrees and try again.
This product is rated for use with PLA filaments ONLY. Any use with filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will NOT prevent prints from warping.
This product is not for use with high-temperature printing applications above 70*C.
Easy removal 3D printing platform for PLA and PLA-based materials